Bio-inspired electronic fingerprint PUF device with single-walled carbon nanotube network surface mediated by M13 bacteriophage template

Min-entropy

Min-entropy is the most conservative way to measure the unpredictability of a set of outcomes and is evaluated by the responses as follows16:

$${text{H}}_{{{text{min}}}} = – log_{2} left( {{text{P}}_{{{text{max}}} } } right),$$

(1)

where ({text{H}}_{{{text{min}}}}) denotes the min-entropy of the samples, and ({text{P}}_{{{text{max}}}}) maximum probability of 0 or 1 at each position of the response to the challenges.

$$left( {{text{H}}_{{{text{min}}}} } right)_{{{varvec{total}}}} = – frac{1}{{ varvec{n}}}mathop sum limits_{{{varvec{i}} = 1}}^{{varvec{n}}} log_{2} left( {{text{P }}_{{{text{max}}}} } right)$$

(2)

If pmax is close to 0.5, then the min-entropy leads to an ideal value of 1. The response patterns from the PUF with a min-entropy close to 1 become almost unpredictable. All the fabricated M13-SWNT-based PUFs had a desirably high min-entropy of 0.98, regardless of the individual PUF cell distribution, demonstrating the unpredictability of their responses.

Randomness and uniqueness evaluation

Randomness evaluates the unpredictability of the responses and is obtained by measuring the number of ‘1 s’ or ‘0 s’ in the response string17. An ideal PUF should have randomness of 50%, which contributes to strong tolerance against brute-force attacks. Uniqueness represents how different responses are expected to be when the same challenge is applied to different PUFs17. It is evaluated by measuring the hamming-distance between responses of different PUFs to the same challenge, and an ideal PUF should have a uniqueness of 50%. The randomness was measured by applying 10,000 different challenges and extracting the 240-bit responses from each PUF. The uniqueness was also evaluated by applying the same challenges 10,000 times to the three PUFs and obtaining the 240-bit responses. The randomness of the M13-SWNT-based PUFs results was 50%, 50.5%, and 51%, all of which are close to the ideal value of 50%, as shown in Fig. 4th Moreover, the uniqueness of PUFs also tends to the ideal value of 50%, as shown in Fig. 4b.

Figure 4

Randomness and uniqueness of the M13-SWNT based PUFs. (a) The randomness of each M13-SWNT based PUFs fabricated in the same batch is close to the ideal value of 50%. (b) The uniqueness of M13-SWNT based PUFs close to the ideal value of 50%.

Environment variations

The PUF device is required to behave reliably by reproducing the same responses even under environmental variations. In particular, the M13-SWNT-based PUFs with a flexible substrate are easily exposed to physical and temperature variations, and these changes often cause a bit flip in the response electrical outputs. However, when the electrical changes can be linearly correlated with environmental variation, the corresponding relationship between resistance and environmental variation can be used to minimize the possibility of bit flips, in a process referred to as error correction18. Therefore, our study investigated the dependencies of resistance on bending and temperature variation. When the M13-SWNT-based PUF was subjected to bending, resistance increased, with respect to strain, (Fig. 5a). Moreover, a temperature increase from 25 to 50 °C linearly decreased the resistance, indicated by increased current flow shown (Fig. 5b). Based on the linear correlation of resistance with these environmental variables the bit errors induced by environmental change can be suppressed via a compensation algorithm.

Figure 5
figure 5

Resistance variations of the M13-SWNT based PUFs caused by environmental variations. (a) Explicit negative relationship between the current and the bending strain on the substrate and (b) positive tendency of the current to the temperature variation.

Leave a Comment

Your email address will not be published.